环氧地坪在施工的过程中，有可能会出现基面含水量过高的情况，而这种情况会直接影响环氧地坪的质量以及日后的使用，因此，必须及时采取措施来解决此类问题。然而，针对于基面含水量问题的解决方法并不是统一的，它需要根据基面含水量的不同程度以及产品的详细机能来决定的。环氧地坪基面含水量较高的解决方法一般分为以下几类：

During the construction of epoxy flooring, it is possible that the water content of the base surface is too high, which will directly affect the quality of epoxy flooring and its future use. Therefore, timely measures must be taken to solve such problems. However, the solution to the problem of base water content is not uniform, it needs to be determined according to the different degree of base water content and the detailed function of the product. The solution to the high water content of epoxy floor is generally divided into the following categories:

专门基面防水层

Special base waterproofing layer

这类产品一般来说应用于含水量比较高的基面，通过涂装一层防渗透渗出涂层来达到防水的效果，适用于含水量不断上升的基面。这种防渗透渗出产品主要是在树脂环氧地坪系统完成后，用来防止水位升高引起的渗水现象进行的保护手段。

Generally speaking, this kind of product is applied to the base surface with high water content. The waterproof effect is achieved by coating a layer of anti-seepage coating. It is suitable for the base surface with increasing water content. This anti-seepage product is mainly used to prevent the seepage phenomenon caused by the rising water level after the completion of the resin floor system.

防潮层

Moistureproof layer

这类产品是通过与地面基层连接形成一个防潮层，防止地下水向地面渗漏。因为此法对于树脂环氧地坪系统具有长远的保护作用，所以被广泛使用。

This kind of product is connected with ground base to form a damp proof layer to prevent groundwater from leaking to the ground. Because this method has long-term protection function for resin epoxy floor system, it is widely used.

防潮底涂层

Moisture proof coating

很多出产商都研发出了针对含水量高的基面题目的专业防潮底涂产品。此法同样对于环氧地坪系统具有长远的保护作用，适用范围也较广。

Many manufacturers have developed a professional moistureproof undercoat product for high moisture content. This method also has a long-term protective effect on the epoxy floor system and has a wider application scope.

尺度底涂层

Scale base coating

在一些特殊情况下，根据基地含水量程度，我们在涂装尺度树脂环氧地坪系统时，需要涂装尺度底涂层。详细的注意事项和操作方法需要按照出产商的指导仿单进行。

In some special cases, according to the water content of the base, we need to coat the scale base coatings when painting the resin floor system. Detailed notes and methods of operation need to be guided by the producers' guide.

透湿系统

Moisture permeable system

弥补了底涂层和树脂环氧地坪面涂层无法达到的防潮性，目前很多出产商都已开发出透湿系统。透湿系统是为了保证材料的水蒸气透过率，也适用于无法装备防水层的基面。总的来说，我们建议在涂装前与出产商进行联系，采取准确的防水层方案，方可避免日后地坪系统泛起题目甚至失效。

To make up for the moisture resistance of the base coatings and epoxy floor coatings, many manufacturers have developed moisture permeability systems. The moisture permeability system is designed to ensure the water vapor permeability of the material, and is also suitable for the base surface which cannot be equipped with waterproof layer. Generally speaking, we recommend contacting the manufacturer before painting and adopting an accurate waterproof layer scheme, so as to avoid problems or even failure of the floor system in the future.